I just installed the Mizu PBX. I defined 2 endusers and they can call each other. I'm having trouble definning a trunk (Callcentric). I see where trunks are defined, but whatever I try it doesn't register. Please help.
Also, how do you Park and Pick-Up a call?
Truns are named "SIP Server" and "Traffic Sender" here. So you can create an inbound trunk by creating a "Traffic Sender" user and you can create an outbound trunk by creating a "SIP Server" user.
See the tutorial for the details.
Call park/pickup can be implemented with stanard SIP call hold and transfer which is enabled by default.
Thank you for the reply, but I’m still having problems.
This is how I configured SIP Server: Full Name: Callcentric Name:1777xxxxxxx105 Password Register: Checked IP: callcentric.com Port: 5060 Transport: UDP Save
When I look at an enduser, the monitor shows Offline when it’s not registered. When I look at the SIP server it doesn’t show offline, but Callcentric doesn’t show the extension registered.
This is how I configured Traffic Sender: Full Name: Callcentric In Auth Type: Auth IP/Username/password Name:1777xxxxxxx105 Password Auth IP: callcentric.com Save
I get error “save a duplicate value cannot be inserted…”. What am I doing wrong?
I have the Mizu free version. I'm using an ATA to register to an enduser.
I don’t understand what you said “Call park/pickup can be implemented with standard SIP” Do I have to install the feature? How? How do I park a call? Can I park myself? In FreePBX you dial 70 and you get an announcement what parking lot you were placed.
I checked Status and it was Manually Stopped. I did a Start Server and the status changed to Started, but changed back to Manually Stopped again. I then did a Restart Server and re-booted my computer. The status is now Started and it registered to Callcentric. Yea!
Issues: I still don't know how to define a Traffic Sender. I get a "Duplicate" error when I try to save it. Don't know how to Park and Pick-Up calls. Do I need to install the Parking feature?
New question; I don't understand defining Routing. I want to send 10 digit numbers to a trunk. If the number has a prefix, how do I remove it?
I apologize for all the dumb posts.
I only have 1 trunk, so I want all outbound to go there. The trunk is registered. I found the instructions for routing.
Here is what I have under Routing: On the left I created a pattern "All". I didn't add any patterns. Priorty: 1 Time: all times Routing Mode: global config
On the right I added 1 destination Destination Priorty List: All Priority: 1 Type: SIP Server Direction: (My trunk name)
I place a call and nothing happens. The trunk has a monitor and nothing is posted.
Right now I don't care abount inbound calls. I want outbound to work and know how to park and pick-up calls
What am I doing wrong?
Thanks
You need to register / login to be able to post in the forum
Forum home